In the attic to insulate the space between the rafters will be the best mat or semi-plates.
Type of mineral wool must be adjusted to the place where you want to be laid. First, you should choose the right product, then see how many inches of insulation needed to partition obtained the required insulation.
External walls with insulation. This is best to check the disc. A good solution is to use CDs (they are cheaper than the hard disc).
Internal walls. Here, the insulating material acts as a sound insulation and no heat. Depending on the type of sounds that are suppressed to be insulated or soft wool boards of lower density, but greater bulkiness (better insulate sounds propagated in space), or hard one.
Attic. The roof insulation in the attic is used mats or boards of higher density.
Flat roofs. These covered with asphalt or other coating covering most effectively isolate the hard discs of wool.
Foundations. If you do not have afforded proper drainage system, better insulate other material than wool, which, after being saturated with water worsens their properties.
Difficult to reach areas. The most suitable elastic wool mat and the pellets injected into the slots.
Fireplace. You can use special discs with aluminum foil lining.
Wires. The isolation of round tubes (ventilation, air conditioning, central heating.) Coatings are used. They are resistant to compression and keep their shape, mainly due to the additional cladding and aluminum foil.
Author: texas Residential Painting & Chicago Window Cleaning Companies
No comments:
Post a Comment