Nowadays, we have a very wide range of thermal plants to ensure adequate thermal conditions in our home. Already at the stage of construction of the house often have to decide on a particular type of heating system. More and more people decide to build house for heating pump - distributor or floor. However, sometimes it is still being used for heating of gravity.
It is worth to know the different types and specifications of thermal plants to know what to choose and make that decision fully conscious.

Thermal Installations

The first type of heating system to heat gravity, also known as traditional. It involves forcing the water flow in the system. This method does not require electrical energy applied, as used here is a phenomenon of floating and sinking heated water cooled. Installation of gravity is mainly used in small buildings, boiler using solid fuel, such as coal or coke.
installation of heat
Heating of this type is used in buildings where the horizontal distance from the extreme heat riser is not greater than 25 meters, and at the height difference between the center of the boiler and the lowest radiator is about 2-3 meters. If these values ​​are exceeded, the use of a conventional heating system becomes very expensive.
Absolutely, installation of gravity of the solid fuel boiler must be open. The main supply system can not be because too little water pressure will not be able to overcome local resistance when it comes to air build these devices.
The pumping station is now most commonly used in central heating systems in houses, and the force of moving water circulation pump is used. The pump can overcome a lot of hydraulic resistance that arise in the course of the water flow in small diameter pipes. Heat pump systems do not have the limitations of the size and extent, and can therefore be used even in very large houses.
installation of heat
The hot water in the heating system can distribute one or two-pipe system.
Installation distributor-pipe is a variation of the bottom section. In the case of the boiler are connected up to two divisions serving distributors on each floor home. There is the installation of a horizontal section where pipe system is connected to the risers to install the distributor.
At present, more and more popular underfloor heating, heated water flows where the wires under the floor surface. The advantage of such a system is energy efficiency.
Author: Chicago Office Cleaning & Bathtubs Renovation Chicago